Solar powered street light, a way to help save the planet
Solar powered street light is an efficient way to lower the electricity bills as it does not require trenching and has low maintenance costs over time while the energy is natural, emission-free and thus causes no pollution. Rang Dong has a number of products for street lighting run on solar power.
General specification of solar powered street light
Solar powered street light is used on urban and village roads, main roads, school grounds, factories and public areas as well as the places where there is no access to the electricity grid.
As sunlight, an endless renewable energy source, is converted into electrical energy, it means no electricity bills.
Environmental protection: No pollution, no noise or radiation, green energy
Rang Dong has marketed a number of solar powered street lights
|
CSD01SL 30W |
CSD01SL/ 50W |
Power (W). |
30 |
50 |
Lumens (lm). |
3200 |
4600 |
Efficiency(lm/W). |
107 |
92 |
CCT (K). |
5000/6500 |
5000/6500 |
CRI (Ra). |
>70 |
>70 |
Dimming |
The light can be adjusted automatically after 4 hours |
The light can be adjusted automatically after 4 hours |
Lighting time |
30 hrs (3 nights) |
30 hrs (3 nights) |
IP |
IP 66 |
IP 66 |
IK |
IK 08 |
IK 08 |
Size(mm). |
650x206x73 |
650x206x73 |
Life span |
50,000 hrs, L70 |
50,000 hrs, L70 |
General specification of Solar panels (PV) |
||
Power (W). |
65 |
95 |
Voltage (V). |
5 |
5 |
Life span |
25 years |
25 years |
The solar powered street light is the cleanest source of energy
- It uses high-quality Cree LED that has good environmental impact resistance, long life, and less lumen depreciation.
- Uses a new-generation LiFePO4 battery, Lithium technology with 8-12 years lifespan, more safety. Poly-crystalline solar panels are highly reliable. The intelligent charge/ discharge controller has a battery protection function and automatically adjusts the brightness, allowing the lamp to operate for a long time. On the days when it is cloudy or rainy, the lights stay on for at least two days.
- Uses a PC optical lens, with high optical transmittance, uniform light distribution, very suitable for street lighting.
- The body is made of high-quality cast aluminum, anti-corrosion, long life, intelligent design, and convenience, making possible the installation in different positions. It has an all-in-one fixture. It is easy to install and a very convenient and streamlined option.
- Applicable standards: IEC 60598-2-3; Quality management system standards: ISO 9001: 2015; Environmental standards: RoHS.
Instructions for usage
- Wiring:
- Pass the wire of solar panels from the top of the solar powered street light, and thread the inside to the top of the tube to install the light
- Plug the solar powered street light in the solar panel.
- Cover the solar panel, and check the light. If it’s on, it means the wiring is complete.
Step 1. Wiring
- Installation of lights:
- Place the light holder on the top part of the light bend pipe.
- Adjust the light holder to an appropriate angle, use the M8x40 bolt through the Φ8 black washer and the light holder, then use the M8 screw to catch the lamp post, and finally tighten it with the M6.E hexagon.
Note: Make sure the solar panel and the light bend pipe are tightly connected.
Step 2. Installation of lights
III. Lamp bend pipe connection: Move the bend pipe that is fitted with the light to the appropriate position on the light’s pole and fix it to the pole.
Step 3. Lamp bend pipe connection
- Solar panels connection:
- Attach the bracket to the rear side of the solar panel.
- Fasten solar panels to the top of the column, adjust the angle of the solar panel, and make sure the column holds the solar panel face directly towards the sun.
Note: Must ensure all the screws of the solar panel holder are fastened with hexagons
Step 4. Solar panels connection
- Fixed light pole: Make sure all the components are securely fastened, then erect the pole and fasten to the coupling.
Note: Before erecting the fixing pole make sure all bolts are tightened.
Conditions of installation: The product should be installed in a sunny area and the solar panel is kept in a position so that it always receives sunlight under any conditions. Otherwise, the lighting time will be shortened.
Maintenance:
- When installed in a dusty or heavily dusty area, such as a coal mine area, etc. Solar panels should be cleaned regularly.
- If the M8 bolt is loose, tighten it immediately.
Should you have any questions, wish to share your ideas of lighting or request a quotation, please send us an email to export@rangdong.com.vn
Our website: https://en.rangdong.com.vn/